Get Knockout Drum Oil And Gas Images

Get Knockout Drum Oil And Gas Images. In a typical gas oil design, the lighter products overhead from the quench tower/primary fractionator are compressed to 210 psi, and cooled to about 100°f. The highest corrosion rates typically occur in the lower section of ko drums, the liquid and vapor phase between.

Oilpro Product Line Flare Knockout Drums
Oilpro Product Line Flare Knockout Drums from oilpro.ca
Started by dineshchemical, sep 12 2017 04:51 am. Another configuration that can be used is one inlet with a much larger outlet. To ensure efficient and safe operation of the vessel, the level inside must be very reliably.

A gas flare, alternatively known as a flare stack, is a gas combustion device used in industrial plants such as petroleum refineries, chemical plants and natural gas processing plants.

A vessel handling large amounts of liquid or a large liquid surge volume will usually be horizontal. When vapour flow stops, the seal gas fills the stack up to point t and then overflows to fill the seal cap before flowing up to the flare tip. Hope it would help you guys. When horizontal, a knock out drum will be constructed with one gas stream inlet, and two outlets, which can then be joined with a manifold.


LihatTutupKomentar